Nobufil brings recycled engineering filaments to Maker Faire Hannover 2026

Nobufil will showcase its full engineering 3D-filament portfolio at Maker Faire Hannover on Aug. 15-16 at the Hannover Congress Centrum. The Austrian maker says every material in the lineup is made from recycled polymers, positioning the products as a lower-carbon alternative for industrial and consumer 3D printing.

Why it matters: - Nobufil is pitching recycled polymers as a replacement for virgin plastics in technical 3D printing. - The company says its full engineering lineup can support industrial use cases while cutting emissions compared with conventional materials. - Standard filaments such as PETG, PCTG and ABS are also framed as lower-carbon options for everyday printing.

What happened: - Nobufil GmbH will present its complete engineering filament portfolio at Maker Faire Hannover on Aug. 15-16, 2026, at the Hannover Congress Centrum. - The lineup includes PC, PETG, PCTG and ABS-based materials, plus carbon- and glass-fiber-reinforced variants. - The company will also show live-printed examples, including drone frames, weather-resistant sensor housings and ESD-safe component holders.

The details: - Nobufil says all engineering grades are made from 100% recycled polymers sourced from industrial plastic waste in Austria and neighboring EU countries. - The portfolio includes ASAx CF, PETG GF, PETG CF, PCTG CF, PLAx GF, ABSx ESD, PLAx CF, PLAx, ASA, PCx and PCx CF. - ASAx CF is positioned for outdoor use with UV stability and high stiffness. - PETG GF is glass-fiber reinforced for dimensional stability and reduced warping. - PETG CF is carbon reinforced for stiffness and chemical resistance. - PCTG CF is described as a tough carbon blend with a smooth surface and strong layer adhesion. - PLAx GF uses 10% glass fiber and impact modification to increase tear and break resistance while keeping PLA-like printability. - ABSx ESD has a surface resistivity of 10⁷–10⁹ ohms and is aimed at electronics, workshops and cleanroom settings. - PLAx CF is designed for lightweight visible parts with improved surface quality. - PLAx is a modified PLA with higher impact resistance for functional parts. - ASA is a reinforced-free weather-resistant grade for general outdoor use. - PCx is a modified polycarbonate blend with 112 °C HDT, high impact resistance and heat resistance. - PCx CF is carbon-fiber reinforced for high stiffness and load-bearing applications. - Nobufil says its standard PETG, PCTG and ABS lines are made from recycled industrial waste and provide consistent print quality. - The PETG line includes glossy and translucent variants, plus a new matte series in six colors. - The matte PETG line is designed to hide layer lines and target cosplay props, architectural models, interior objects and consumer goods. - Both glossy and matte PETG are described as near-warp-free, odorless and compatible with most common 3D printers. - Nobufil says its recycled ABS has less warping and less odor than conventional ABS and can be printed on open-frame machines. - The company says its standard filaments can reduce CO₂ emissions by up to 80% versus comparable virgin-material products. - Nobufil says all materials are certified as technical engineering materials. - The filaments are sold in 1.75-mm format on 1-kg spools, with 850-g spools for ASAx CF, PCTG CF and PLAx CF, and 500-g spools for ABSx ESD. - Visitors at the show will get exclusive event discounts both at the booth and online during the event.

Between the lines: - Nobufil is using a major maker event to show that recycled feedstock is not limited to hobby-grade printing. - The company is also trying to close the gap between sustainability messaging and performance claims by emphasizing mechanical strength, surface quality and process reliability. - The focus on European waste streams and local production suggests a supply-chain story as much as a materials story.

What's next: - Nobufil will offer on-site guidance on material selection, print settings and custom business solutions during the event. - Business customers can contact the company at office@nobufil.com for larger orders or tailored material requests. - The company’s products are available through its online 3D-filament shop. - More information is available on the company's website.

The bottom line: - Nobufil is betting that recycled technical filaments can compete on performance, not just sustainability messaging.